VersaDial™ PC1 All Composite Quick-Connect Single Hose Barb
317029Composite injectors are designed to stand up to the most aggressive, yet common, car wash chemicals.
Dual hose barb Venturi injector for diluting two chemicals with water. The nozzle and body of these injectors are manufactured using a corrosion-resistant composite material, which has been tested by the industry's leading chemical manufacturers with consistently positive results. A Hastelloy® spring, a Teflon® check ball, and an exclusive XFC o-ring material are also used for long life and durability.
Injectors are color-coded based on the water flow needed for each individual application, and combine with VersaDial™ Chemical Control Device to proportion the precise chemical mix ratio.
For use with Aqua-Lab Chemical Dispensing Systems and VersaDial™ Chemical Control Device.
PC1 injectors are for use with SAM valves only.
Specifications
Connection Type: PC1 Quick Connect, All Composite
Max Pressure Inlet / Outlet: Up to 250 PSI (17 bar)
Temperature Range: 40º F - 140º F (4º C - 60º C)
Number of Hose Barbs: 1
Maximum Wrench Torque: Hand Tighten Only (30 in-lbs)
Part Numbers
| Injector Color | Flow Rate @ 200 PSI | Part Number |
|---|---|---|
| White | 0.25 GPM | 317029 |
| Yellow | 0.50 GPM | 317040 |
| Tan | 0.75 GPM | 317051 |
| Red | 1.00 GPM | 317057 |
| Orange | 1.50 GPM | 317070 |
| Grey | 2.00 GPM | 317083 |
| Dark Blue | 2.25 GPM | 317086 |
| Light Blue | 3.00 GPM | 317095 |
| Light Green | 3.25 GPM | 317098 |
| Pink | 3.75 GPM | 317106 |
| Dark Green | 5.50 GPM | 317125 |
VersaDial™ PC1 injectors are for use with SAM valves and VersaDial™ Chemical Control Devices only.
